Supported Display Monitors - NEC MultiProfiler User Manual

5
| MULTIPROFILER - USER'S GUIDE

Supported Display Monitors

MultiProfiler supports the following NEC display monitor models:
• MultiSync PA231W – 23" standard color gamut LCD monitor
• MultiSync P241W – 24" standard color gamut LCD monitor
• MultiSync PA241W – 24" wide color gamut LCD monitor
• MultiSync PA271W – 27" wide color gamut LCD monitor
• MultiSync PA301W – 30" wide color gamut LCD monitor
• MultiSync MD301C4 – 30" wide color gamut medical LCD monitor
MultiSync PA231W and P241W Important Note:
The color gamut of the PA231W and P241W displays are not wide color gamut, and are closer to
sRGB.
For this reason, certain preset color gamuts such as AdobeRGB and DCI are not available, since
they far exceed the color gamut of the display. Although MultiProfiler will allow the Picture
Mode settings to be modified to include large color gamuts, keep in mind that the actual color
gamut of the display is smaller, and will not be able to display colors outside of this gamut.
The PA231W display does not have an internal luminance stabilization circuit. It is therefore not
able to automatically set and maintain the luminance at an absolute value.
For this reason, the Brightness and Black Level controls are shown as a percentage values within
MultiProfiler.
The DICOM mode is called DICOM Sim (simulation) because the lack of an absolute level for
Brightness and Black Level means approximate values are used. True DICOM requires absolute
values for Brightness and Black Level in order to create a very accurate response curve.