NEC MultiProfiler User Manual page 28

28 | MULTIPROFILER - USER'S GUIDE
Select Custom type adjustment wizard page
The Select Custom type page is shown when Custom Picture Mode is selected in the first wizard page, and is used to
select the type of Custom Picture Mode. These modes allow a custom name to be entered for easy identification.
The Custom Picture Mode can be used for three different ways.
These are:
• Full Custom - In this mode, custom values and settings can be created for the Gamma, White Point, Color
Gamut, Brightness and Black Level. The functionality of this mode is exactly the same as the Full Picture Mode,
with the addition that it can be given a custom name.
• Emulate another display - In this mode, the monitor can be made to emulate another monitor by using the
ICC/ColorSync profile of that monitor to set the Gamma, White Point, Color Gamut, and Brightness. This can be
useful for applications in which the monitor needs to emulate the color characteristics of another type for legacy
purposes.
• Print Emulation - In this mode, the monitor can emulate the output of a printer by using the ICC/ColorSync
profile for the printer to create a 3D LUT (Look-Up-Table) in the monitor. This is useful for use with applications
that do not offer print previews or softproofing of a printer. This mode is normally used together with a normal
(non-3D LUT) Picture Mode to switch between normal and print emulation views using MulitProfiler or the OSD
(On Screen Display) controls.
The wizard pages that follow will depend on the mode selected on this page.