Using The Color Configuration Wizard - NEC MultiProfiler User Manual

22 | MULTIPROFILER - USER'S GUIDE

Using the Color Configuration Wizard

The Color Configuration Wizard is used to configure the color characteristics of the currently selected Picture Mode.
There are 5 Picture Modes that can be configured and selected either using the MultiProfiler software, or using the On
Screen Display (OSD) controls.
Introduction wizard page
The first wizard page is used to select the type of preset or customizable Picture Mode. The selection made will
determine which wizard pages follow and the color characteristics that can be adjusted. Refer to the previous table to
determine which color characteristics are fixed or adjustable for each type of Picture Mode.
The choice of which Picture Mode preset or custom mode to select will depend on the application. For example, the
Presets sRGB and AdobeRGB offer quick access for creating a Picture Mode with the color characteristics specified
by each standard, which will be suitable for many applications. Other Picture Modes such as Full offer more flexibility,
in that the Color Gamut and White Point can also be adjusted.
The Custom 1, 2, 3 (and 4 & 5 - if supported by the monitor model) modes offer the ultimate flexibility in that all color
characteristics can be adjusted and the mode can be given a custom name. These modes can also be used to emulate
another monitor or even a printer using the 3D LUT feature.