Table of Contents
Advertisement
19 | MULTIPROFILER - USER'S GUIDE
Status panel
Display Information
Model Name shows the model name of the currently selected monitor.
Serial Number shows the serial number of the currently selected monitor.
Operating Hours shows the total number of hours that the currently selected monitor has been in use.
Firmware Version shows the internal firmware version of the currently selected monitor.
Display Profile shows the ICC/ColorSync profile that is currently associated with the selected monitor in
the Operating System's Color Management System.
The Status panel shows various aspects of the current
software and connected monitor.
Software Version shows the version information for
the MultiProfiler software.
The Check for Software Updates button will directly
query the NEC website to see if a newer version of the
software is available. If a newer version is available,
a message will be shown listing the new version, and
a link to download. This function requires an Internet
connection and many not function if a proxy setting is
being used on the system, or if a firewall or security
application blocks network access from MultiProfiler.
The Re-Synchronize Color Settings button will query
the Picture Mode settings on the monitor to make sure
that the modes listed in MultiProfiler reflect those of the
monitor. During this process, the screen will flash and
change color for approximately 30 seconds.
For example, if the monitor was manually adjusted
using the On Screen Display controls, then the monitor
settings may become out of sync with those shown
in MultiProfiler. In this case, use this feature to re-
synchronize the MultiProfiler settings.
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiProfiler and is the answer not in the manual?
Questions and answers