NEC DLP Cinema NC3200S User Manual page 67

6-6-4. SDI-A, SDI-B, SDI-C, SDI-D (HD-SDI input connector) (BNC)
This is a signal input connector (SMPTE 292/HDSDI) for CINEMA.
The SMPTE 292/HD-SDI transfers HDTV signals with 1.5 GHz digital serial signals, so use a 75 Ω coaxial cable having a
thickness and characteristics higher than 5C-FB, and use a BNC for the connector.
6-6-5. DVI-A, DVI-B (DVI digital Input connector) (DVI-D 24 pin)
This is a single link DVI input connector that is compliant with hot plug detect (HPD). Use a single link cable. Noise may be
generated in the video if you use a dual link cable.
EDID is available even when the projector is switched off.
1 2 3 4 5 6
9 10 11 12 13 14
17 18 19 20 21 22
Pin view of female connector
Signal
Pin No.
7 8
15 16
23 24
10
11
12
GND
Signal Name
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2 Shield
4 Unused
5 Unused
6 DDC Clock
7 DDC Data
8 Unused
9 TMDS Data 1-
TMDS Data 1+
TMDS Data 1 Shield
Unused
6. Appendix
Pin No. Signal Name
13 unused
14 +5V Power
15 Ground
16 Hot Plug Detect*
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0 Shield
20 unused
21 unused
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
67