NEC DLP Cinema NC3200S User Manual page 47

6
Close the air inlet cover.
Fasten the air inlet cover by inserting the protrusion on the top left leg into the hole on the projector when the projector
is facing towards you.
This completes replacement of the air filters for the lamp air inlet.
5-3-2. Replacing air filters for the projector air inlet on the front
Prepare the optional NC-80AF02 to replace air filters for the projector air inlet on the front. The NC-80AF02 contains four
replacement air filters. Two air filters are required for the projector air inlet on the front.
1
Turn off the power to the projector.
2
Remove the air inlet cover.
Push the latch until it clicks to unlock the air inlet cover. The air inlet cover is attached to the projector by the bottom
edge.
Take care not to drop the cover when removing the air inlet cover.
NOTE
Latch
5. Maintenance of Your Projector
7