Connecting Your Dvd Player Or Other Av Equipment - NEC PA500U User Manual

Connecting Your DVD Player or Other AV Equipment

Connecting Video/S-Video Input
S-Video cable (not supplied)
Video cable (not supplied)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
VIDEO IN
S-VIDEO IN
NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs.
NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements.
NOTE:
• An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan
converter.
• Video signals can be projected when a video cable (commercially available) is connected to the Computer 3 video input connector's
G/Y connector.
In this case, set the on-screen menu's SETUP → OPTION(1) → SIGNAL SELECT(COMP3) to [VIDEO] and select Computer 3 for
the input selection.
SOURCE button on the projector
cabinet
VIDEO
S-VIDEO
6. Installation and Connections
Audio cable (not supplied)
Audio equipment
Audio cable (not supplied)
Button on the remote control
147
VIDEO
S-VIDEO