Turning On The Projector - NEC PA500U User Manual

 Turning on the Projector

1. Remove the lens cap.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• When the message "PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD." is displayed, it means that the [SECURITY]
feature is turned on. (→ page 37)
• When the ECO message is displayed, it means that [ON] is
selected for [ECO MESSAGE]. (→ page 102)
• Pressing buttons such as power button and MENU button will
make sound. To turn off the beep sound, select [OFF] for [BEEP]
from the menu. (→ page 109)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: A blue screen (blue background) is displayed when no signal
is being input (by factory default menu settings).
2. Projecting an Image (Basic Operation)
Standby
Steady orange light
(→ page 214)
14
Blinking Power On
Blinking blue light Steady blue light