Recommended Web Browser Settings - Dynex DX-WEGRTR User Manual

46
2 Click Network. The Network window opens.
3 Select Built-in Ethernet from the Show list.
4 Click the TCP/IP tab. Next to Configure:, you should see Manually or Using DHCP. If
you do not, check the PPPoE tab to make sure that Connect using PPPoE is NOT
selected. If it is, you will need to configure your router for a PPPoE connection type
using your user name and password.
Note: If Manually is selected in the Configure list, your router will need to be set up for a
5 Select Using DHCP from the Configure: list, then click Apply Now.
Your network adapter(s) are now configured for use with the router.

Recommended Web browser settings

In most cases, you will not need to make any changes to your Web browser's settings. If you
are having trouble accessing the Internet or the Web-Based Advanced User Interface, then
change your browser's settings to the recommended settings in this section.
To change settings in Internet Explorer 4.0 or higher:
1 Start your Web browser. Open the Tools menu, then select Internet Options. The
Internet Options page opens.
static IP connection type. Write down the address information. You will need to enter this
information into the router.
Setting up your wireless router