USING THE VNAV FEATURE
Use the VNAV (Vertical Navigation) feature to ensure the aircraft is at the proper
altitude. The VNAV Indicator appears on the HSI (when displayed) as a horizontal teal
bar. A message appears when approaching the VNAV Profile. When the bar is in the
vertical center of the HSI, the aircraft is at the proper altitude for the VNAV Profile.
Enabling/disabling the VNAV indicator:
1) From the 'Home' Screen, touch the HSI/Panel Icon.
2) Touch the Menu Icon
3) Touch the 'Enable VNAV Indicator' or 'Disable VNAV Indicator' menu
option (only available when navigating a Direct To or Flight Plan).
Capturing/cancelling VNAV profile:
1) Enter a valid VNAV profile (see 'Configuring a VNAV Profile' below) and
begin navigation.
2) From the 'Home' Screen, touch the HSI/Panel Icon.
3) Touch the 'Capture VNAV Profile' or 'Cancel Capture' menu option
(only available when navigating a Direct To or Flight Plan).
VNAV Indicator
190-01117-02 Rev. C
VNAV Indicator (Panel)
Garmin aera 500 Series Pilot's Guide
GPS Navigation
41