Table of Contents
Advertisement
Setting Up Various UNIX Systems
This section shows some scripts and setup examples for
different types of UNIX systems:
Setting up for SCO UNIX
Some UNIX systems, such as SCO, do not support the Berkeley
lpr print function. The following script allows you to print
from within some applications using ftp, which is supported
on most TCP/IP systems. The two scripts have been tested for
SCO UNIX, but may require modification for other systems.
You can use either script.
In SCO UNIX the original printer model scripts are located in
directory usr/spool/lp/model.
The process of creating a printer using the SCO administration
program (SYSADMSH) copies these files to:
/usr/spool/lp/admins/Ip/interfaces.
You can place the script directly into your interface directory.
Also, you can
/usr/lib/lpadmin-pPRINTER-v/dev/null-i/etc/lNTERFACE-
SCRIPT
where PRINTER is the printer name used in lp-dprinter and
INTERPACESCRIPT is the file name containing the next ftp
script.
Using UNIX 5-9
Advertisement
Table of Contents
