Protocol For Acquiring Status And Setting - Epson UB-R05 Technical Reference Manual

Protocol for acquiring status and setting

The following protocols are used to acquire the status and set for the UB-R05.
 SNMP
The general purpose MIB management tool, OPOS/APD, uses this to acquire and set
the TM printer status.
SNMP Version
Protocol
Server Port Number
Trap Sending Port Number
Trap Destination
Supported PDU type
Community
 ENPC
The network configuration tool (EpsonNet Config) and the dedicated driver software
(such as OPOS/APD) use this to acquire and set the TM printer status.
Protocol
UDP port number
Compatible packet types
 HTTP/HTTPS
EpsonNet Config (Web version) uses HTTP/HTTPS protocol on the dedicated Web
page for acquiring and changing the UB-R05's network parameters.
Server Port Number
User name
Password
Supported language
No. of possible simultaneous
connections
*
The password set for EpsonNet Config (Web version) can also be used for EpsonNet Config.
SNMP v1 (RFC1157) compliant
(SNMPv2 and SNMPv3 not supported.)
UDP/IP
161
162
Up to 2 destination IP addresses can be registered. (Initially, nothing is set.)
Get Request, Get Next Request, Get Response,
Set Request, Trap
Each community name can be set with 32 ASCII characters or less.
UDP/IP
3289
Probe, Initialize, Query, Setup, Notify
HTTP: 80, HTTPS: 443
"epson" (cannot be changed)
(Default value) Product serial number
Each community name can be set with 20 ASCII characters or less.*
English
1
Chapter 6 Product Specifications
42