Epson PowerLite Pro Cinema 6020UB User Manual page 73

The picture is blurry.
■
Make sure the
Input Signal
■
There may be dirt on the lens. Clean the lens as described on page 58.
■
Adjust the focus (see page 26).
■
Make sure the lens is not fogged by condensation. If you've just moved the projector from
a cold environment, wait a couple of minutes before using it.
■
Adjust the
Sharpness
■
If you're projecting from a computer, you may need to adjust the
settings (see page 45).
The colors on the screen don't look right.
■
Make sure the
Input Signal
page 52).
■
Press the
Color Mode
page 31).
■
Make sure your video cables are secure on both ends.
■
Check the brightness and contrast settings (see page 38).
■
Fine-tune the colors with the settings listed on page 41.
■
If the picture looks dark, you may need to replace the lamp. Check the lamp usage timer
to see how long the lamp has been in use (see page 66). Replace the lamp if it's close to
the end of its service life (see page 62).
is set correctly for your video equipment (see page 52).
setting (see page 40).
is set correctly for your connected video equipment (see
button on the remote control to select a different color mode (see
and
Tracking Sync
Problem Solving
73