Epson PowerLite Pro Cinema 6020UB User Manual page 29

Note: If the glasses don't automatically display 3D content, you may need to pair them with
the projector. Move the glasses within 10 feet (3 m) of the projector, then press and hold the
Pairing button on the 3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds, and you will see a message
on the screen if pairing is successful.
The 3D glasses turn off after 30 seconds if they aren't receiving a 3D signal. Slide the power
switch to Off and then back to On to resume viewing 3D content.
The light on the 3D glasses indicates the current status of the glasses:
Light state
Flashing red
Flashing green
Solid red
Solid green
Flashing green and red
Solid green for 10 seconds,
then turns off
See page 71 for more 3D troubleshooting tips.
Status
The battery is low.
The glasses have entered standby mode. Turn the 3D glasses off and
back on to continue viewing 3D content.
The glasses are charging.
The charging process is complete.
The glasses are attempting to pair with the projector.
The glasses have successfully paired with the projector, or the glasses
have been turned off.
Making Basic Adjustments
29