Download Print this page

Using The Remote Control; Adjust The Image - Epson PowerLite 1945W Quick Setup

Powerlite 1945w wxga 3lcd projector
Hide thumbs Also See for PowerLite 1945W:

Advertisement

3
Open the A/V Mute slide all the way.
4
Press the
power button on the projector or remote control. The
projector beeps, the power light flashes green, and then stays on.
Note: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
5
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press
. Select Language and press
language and press
. Press the Menu button to exit the menu system.

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Turn the zoom ring to reduce or enlarge the image.
4
Turn the focus ring to sharpen the image.
5
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.
power button twice, then
. Select your
W
T
or
,
or
buttons on the projector to

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online User's
Guide.
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11n,
802.11g, or 802.11b wireless network. Your computer must have a wireless
card or built-in wireless interface, and be running Windows 7, Windows Vista
Windows XP Professional x64, Windows XP, or Windows 2000, or
Mac OS X 10.4 to 10.7.
1
To install the wireless LAN module, open the air filter cover.
2
Remove the screw securing the wireless LAN module stopper, then
remove the stopper.
3
Install the wireless LAN module.
Choose which
source to display
Navigate projector
menus
Get solutions to
common problems
,
®

Advertisement

loading

This manual is also suitable for:

Powerlite 1955Powerlite 1965