Epson BrightLink 475Wi User Manual page 13

Determine the position for attaching the table mount
(1) Align one side of the U-shaped arch on the base frame unit
line of the projected image
(2) Tighten the adjuster bolts that were temporarily fixed as shown on page 10 . Make sure you
tighten the adjuster bolts with equal force.
Warning
Tighten all screws firmly. Otherwise, the projector or the mount may fall and cause personal
injury or damage.
to align the center of the lens and the center of the image.
13
with the estimated center
U-shaped arch
Center of the image
Table
Projected image