Dynex DX-E102 User Manual page 5

Dynex products desktop 10/100mb network card user guide

Hide thumbs Also See for DX-E102:

Table of Contents

Desktop 10/100Mb Network Card

6 Carefully insert the adapter into the PCI slot. Do not touch the metal connector on the

adapter.

7 Secure the adapter to the case using the screw you removed from the backplate.

8 Reinstall your computer's case cover.

9 Plug in the power cord and other cables, then turn on your computer.

After your computer starts, Windows may load a driver automatically. However, for optimal

performance you should install the included driver. See the section "Installing the adapter

driver" on page 5.

Installing the adapter driver

Note: Driver installation is not required for Mac OS X v10.4.0 or higher.

(Windows 7/Vista/XP/2000)

To install the card driver:

1 Insert the DX-E102 CD into your CD or DVD drive. The Dynex PCI Adapter window opens

automatically.

Table of Contents