Epson XP-800 Quick Manual page 36

Connect the Printer to Your Wireless Network
If you are unable to connect to your wireless network using the product CD and the Start
Here sheet, you can use the touch screen on your product. Before you start, make sure you
know your network name (SSID) and password.
1. Press
2. Select
Wi-Fi Setup Wizard
3. Scroll down until you see the name of your wireless network, then select it. Continue
with step 6.
If you don't see your network name, select
Networks
4. Enter your network name (SSID).
■
Press the touch screen buttons repeatedly to scroll
through characters.
■
If your network name has uppercase (ABC) or
lowercase (abc) letters, make sure you enter them
correctly.
■
Press
■
Press
■
Press
5. Select
Done
6. If your network has security enabled, you see the
password screen:
7. Follow the instructions above to enter the password. If
your network password has uppercase or lowercase
letters, be sure to enter them correctly.
8. Select
Done
password.
When the printer is connected to your network, the WiFi light should be green, and not
flashing. Make sure you install the software on every computer from which you want to
print. When prompted during software setup, select
wireless network
36
Solving Problems
if necessary, then select
.
. You see this screen:
or to move the cursor.
to enter symbols.
to delete.
when you're finished entering your network name.
when you're finished entering your
.
on the touch screen.
Wi-Fi Setup
Other
The printer is already on my