Setting Up The Viewer; Preparing The Battery - Epson P-3000 Multimedia Storage Viewer Quick Reference Manual

Setting Up the Viewer

Preparing the battery

Installing the battery
1. Open the battery cover.
2. Insert the battery into the compartment in the
direction of the arrow on the battery sticker.
Charging the battery
Insert the battery until it
clicks and locks in place.
3. Close the battery cover and slide it to the left
until it clicks.
Connect the AC adapter, then plug the other end into
a power outlet.
The Charge lamp lights green during charging. It
takes about 3.5 hours to fully charge the battery when
the power is off.
Charge lamp
3
Getting Started
1
1
1
1
1
1
1
1
1