Initial Settings - Epson P-3000 Multimedia Storage Viewer Quick Reference Manual

Initial settings

When you turn on the viewer for the first time, the
setting screen appears.
Set the language, date and time.
1. Select the language to use with the Up or Down
key, then press the OK key.
2. After the message saying "Set current Date and
Time. " appears, press the OK key to proceed.
Set the date and time using the 4-way ring.
3.
4. After you finish all settings, select Complete
using the Right or Left key ,then press the OK
key.
Note:
If approximately 24 hours passes after battery power is cut, the
date and time settings may be lost, and will need to be set
again.
5
Getting Started
1
1
1
1
1
1
1
1
1