Table of Contents
Advertisement
3.
Open the USB connector's cover and connect the
USB cable to the viewer. Then connect the other
end of the USB cable to the computer.
The LCD turns off.
Note:
When the viewer is connected to a computer, do not
connect a USB device to the Host-standard A, or touch
the connector interface.
20
Backing Up Data from the Viewer
USB (Standard-A)
USB (Mini-B)
4.
Launch the Epson Link2 software.
For Windows:
Click Start, point to All Programs (or Programs),
then select EPSON. Select Epson Link2, then click
Epson Link2.
Alternatively, click the shortcut icon of the Epson
Link2 software on the desktop.
For Macintosh:
Double-click the Epson Link2 icon in the Epson
Link2 folder.
Only data that has not yet been backed up will be
copied to the computer automatically.
5.
Disconnect the viewer from the computer.
For Windows:
Click Unplug or Eject Hardware on the
computer screen, then remove the USB cable.
For Macintosh:
Drag and drop the viewer icon and memory
cards (if inserted) to the trash can on the
computer screen, then remove the USB cable.
Advertisement
Table of Contents
