Epson LX-1170+II User Manual page 83

Baud rate
Use this option to set the data transfer rate (baud) for the serial
interface. The baud rate is measured in bits per second (bps). See
your computer manual and software documentation for the
proper setting.
Parity
When this option is set to None, parity checking is disabled. The
parity bit, if used, provides a basic form of error detection. See
your computer manual and software documentation for the
proper setting.
Data length
Set the data length of the serial interface to 7 bit or 8 bit. See your
computer manual and software documentation for the proper
setting.
Parallel I/F bidirectional mode
The parallel interface bidirectional transfer mode is used when
this feature is turned on. If bidirectional transfer mode is
unnecessary, turn this off.
Packet mode
Make sure to select AUTO to print from Windows applications
using the printer driver included in the software CD-ROM that
comes with the printer. Turn off this mode if you encounter
connection problems when you are printing from applications
based on other operating systems such as DOS.
Character table
You can select among various character tables.
83