Table of Contents
Advertisement
Two or more sheets feed at one time.
Cause
You may have loaded too
many sheets in the bin.
You may have forgotten to fan
the stack of paper before
loading it into the bin.
The paper feed is crooked.
Cause
The paper may be old or
creased.
There may be too much paper
in the stacker.
The right and left paper guides
are too far apart.
You may not be using the right
type of paper for the cut-sheet
feeder. For example, your
paper may be too heavy or too
light.
One page of printing has spread to two pages.
Cause
Your application software
settings may be incorrect.
100
What to do
Remove some sheets. See "Paper" for
information on the types and quantity of
paper that can be loaded with the
cut-sheet feeder.
Remove the paper and fan it.
What to do
Use only new, clean sheets of paper.
Remove some sheets.
Position the paper guides to match the
width of your paper.
Make sure your paper meets the
requirements of your printer and
cut-sheet feeder. See "Paper" for
information on the paper specifications.
What to do
Check that the page-length setting and
lines-per-page setting in your
application software are correct.
Advertisement
Table of Contents
