Paper Is Improperly Loaded; Paper Is Not Ejected Fully Or Is Wrinkled; The Printer Does Not Print; All Lights Are Off - Epson WorkForce Pro WP-M4015 User Manual

User's Guide
❏ Fan the edges of the stack to separate the sheets, then reload the paper.
❏ If too many copies of a file are being printed, check the Copies setting in your printer driver as follows, and also
check in your application.
For Windows, check the Copies setting on the Main window.
For Mac OS X 10.5 or later, check the Copies setting in the Print dialog.

Paper is improperly loaded

If you have loaded the paper too far into the printer, the printer cannot feed the paper correctly. Turn the printer off
and gently remove the paper. Then turn the printer on and reload the paper correctly.

Paper is not ejected fully or is wrinkled

❏ If the paper does not eject fully, press the b button to eject the paper. If the paper is jammed inside the printer,
remove it by referring to the following section.
"The Paper Jams" on page 80
&
❏ If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack of paper.
Note:
Store any unused paper in its original packaging in a dry area.

The Printer Does Not Print

All lights are off

❏ Press the P button to make sure the printer is on.
❏ Turn off the printer and make sure that the power cord is securely plugged in.
❏ Make sure that your outlet works and is not controlled by a wall switch or timer.

Lights came on and then went out

The printer's voltage may not match the outlet rating. Turn off the printer and unplug it immediately. Then check the
label on the back of the printer.
!
Caution:
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.

Only the power light is on

❏ Turn off the printer and computer. Make sure the printer's interface cable is securely plugged in.
Troubleshooting for Printing
89