What To Do If - Electrolux EOB8741AOX User Manual

WHAT TO DO IF...

WARNING!
Refer to "Safety information" chap-
ter.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows F102.
The display shows an er-
ror code that is not in this
list.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Problem Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set
The automatic cut-out is
activated.
The fuse is released.
The lamp is defective.
The door lock is defective. • Fully close the door.
There is an electrical fault.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting and changing the
time".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
Replace the lamp.
• Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
• If the display shows
F102 again, contact the
Service Center.
• Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
• If the display shows the
error code again, con-
tact the Service Center.
.........................................
.........................................
.........................................
ENGLISH 25