• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
— 6 hours
— 5 hours
— 4 hours
— 1.5 hours
3.3 The heat setting
Touch the control bar at the heat setting.
Change clockwise or counterclockwise, if it
is necessary. Do not release before you
have a correct heat setting. The display
shows the heat setting.
3.4 Connect Function
Use the Connect Function with the
Infinite Plancha accessory
The Connect Function connects two right
side cooking zones under the accessory
and they operate as one.
First set the heat setting for one of the
To activate the Connect Function, touch
. To set or change the heat setting,
touch one of the control sensors.
To deactivate the Connect Function, touch
. The cooking zones operate independ-
1) The Infinite Plancha accessory is not supplied with the appliance. For more information, please
contact your local supplier.
3.5 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
Immediately touch the necessary heat
setting. After 5 seconds
in the display.
To stop the function change the heat set-
3.6 Power function
The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After, that the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
comes on. To deactivate, touch a heat
3.7 Power management
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.
comes on in the dis-
2 3 4 5 6 7 8 9 10 11 12 13 14