Daily Use; Heat Setting Displays - Electrolux EHD8740FOK User Manual

www.electrolux.com
6
sensor field
10
11

2.3 Heat setting displays

Display
-
+ digit
/
2.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
residual heat!

3. DAILY USE

3.1 Activation and deactivation
Touch
tivate the appliance.
The control panel comes on after you acti-
vate the appliance and goes off after you
deactivate the appliance.
When the appliance is deactivated you can
see only
3.2 Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
The cooking zone is deactivated.
The cooking zone operates.
The
The Automatic Heat Up function operates.
Power function operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator) : continue
/
cook / stay warm / residual heat.
Lock/The Child Safety functions operates.
Not correct cookware or too small or no cookware on the
cooking zone.
The Automatic Switch Off function operates.
\ \ The risk of burns from
for 1 second to activate or deac-
sensor field.
function
To activate and deactivate the appliance.
To set the cooking zone.
Description
function operates.
OptiHeat Control shows the level of the re-
sidual heat. The induction cooking zones
make the heat necessary for cooking di-
rectly in the bottom of the cookware. The
glass ceramic is hot from the heat of the
cookware.
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
use the appliance again, wait for the
cooking zone to cool down.
• You use incorrect cookware. The symbol
comes on and the cooking zone de-
).
activates automatically after 2 minutes.