Table of Contents
Advertisement
www.electrolux.com
8
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
00
99
-
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:
set the cooking zone with
or
.
• To deactivate the timer: set the cook-
ing zone with
maining time counts back to
indicator of the cooking zone goes out.
When the countdown comes to an end,
the sound operates and
cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) : touch
again and again until the indicator of
a necessary cooking zone comes on.
• To activate the CountUp Timer: touch
of the timer
indicator of the cooking zone starts to
flash slow, the time counts up. The dis-
play switches between
time (minutes).
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone starts
to flash quickly. The display shows the
time that the cooking zone operates.
• To deactivate the CountUp Timer: set
the cooking zone with
of the timer to set the time (
minutes). When the indicator
. The indicator of
. Touch
. Touch
. The re-
00
00
flashes. The
comes on. When the
and counted
and touch
or
to deactivate the timer. The indica-
tor of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Minder
while the cooking zones do not operate.
Touch
set the time. When the time comes to an
end, the sound operates and
• To stop the sound: touch
STOP+GO
The
function sets all cooking zones that
operate to the lowest heat setting (
When
heat setting.
The
function does not stop the timer
function.
• To activate this function touch
symbol
. The
• To deactivate this function touch
The heat setting that you set before
comes on.
LOCK
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch
bol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
THE CHILD SAFETY DEVICE
This function prevents an accidental opera-
tion of the appliance.
To activate the child safety device
• Activate the appliance with
set the heat settings.
• Touch
comes on.
• Deactivate the appliance with
. Touch
or
of the timer to
00
operates, you cannot change the
comes on.
for 4 seconds. The symbol
flashes.
).
. The
.
. It pre-
. The sym-
. The heat
. Do not
.
Advertisement
Table of Contents
