Table of Contents
Advertisement
4.7 Timer
Count Down Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
of the timer to set the time (
00
99
-
minutes). When the indicator
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:
set the cooking zone with
or
.
• To deactivate the timer: set the
cooking zone with
remaining time counts back to
The indicator of the cooking zone goes
out.
When the countdown comes to an end,
the sound operates and
The cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
touch
again and again until the indi-
cator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch
of the timer
When the indicator of the cooking zone
starts to flash slow, the time counts up.
The display switches between
counted time (minutes).
. The indicator of
. Touch
. Touch
. The
00
.
00
flashes.
comes on.
and
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the cooking zone
operates.
• To deactivate the CountUp Timer:
set the cooking zone with
or
to deactivate the timer. The in-
dicator of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Mind-
er while the cooking zones do not oper-
ate. Touch
. Touch
er to set the time. When the time comes
to an end, the sound operates and
flashes.
• To stop the sound: touch
4.8 STOP+GO
The
function sets all cooking zones
that operate to the lowest heat setting (
).
When
operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
The symbol
comes on.
• To deactivate this function touch
The heat setting that you set before
comes on.
4.9 Lock
When the cooking zones operate, you
can lock the control panel, but not
prevents an accidental change of the heat
setting.
First set the heat setting.
To start this function touch
bol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
ENGLISH
9
and touch
or
of the tim-
00
.
.
. It
. The sym-
. The heat
Advertisement
Table of Contents
