215
Using the Crojector List
Confirming the Status of a Projector
2.5.1
Confirm detailed properties of a projector shown in the Projector list with the following
procedures.
1
Select a projector to confirm the properties from the Projector list, and select
[Projector information] from the [Projector] menu.
Properties dialog of the selected projector will display.
Projector name, location, status, lamp replacement, air filter cleaning and replacement
information are displayed in the [Projector information] tab.
Network settings information are displayed in the [Network information] tab. Click the IP
address beside "Web link" to display the projector's web settings dialog.
Note
-
You can also double-click the projector name in the Projector list to display
the Properties dialog.
CHAPTER 2 • Routine Operation
C7