The Projector - Canon LV-S3 Assembly & Installation Manual

Fig. 1 Assembly
z
x
Attach the Securing wires to the Projector
Secure the projector and the Projector bracket
with the included Securing wires to support

the projector.

Measures to prevent the projector
from falling
* Make sure to take measures to prevent the
projector main body from falling as explained
here.
Adjuster
1. Pull out the adjuster from the
projector main body.
c
Ceiling
hanging
fitting
2
Wire
(included in package)
2. Hang securely the drop
prevention wire included in the
package to the adjuster in the
main body (2 positions).
Main body
mounting fitting
Screws (A)
Plus screw with round head M4 x 10 (3 pcs.)
with spring washer and flat washer
Main body mounting fitting (1 pc.)
Projector main body
Securing wire (long)
Wire clamp
3. Tighten securely the wire clamp
with the drop prevention wire,
and push down the adjuster in
the main body.
v
Securing wire (short)
A Screws
(included in package)
4. Attach the drop prevention wire to
the main body mounting fitting
with two A screws (M4 x 10 mm)
included in the package. Attach
the drop prevention wire on the
opposite side in the same way.
Fix securely the main body
mounting fitting to the ceiling
hanging fitting with four A
screws (M4 x 10 mm)
included in the package.