Canon LV-S3 Assembly & Installation Manual page 3

Fig. 2 Adjustment
Angle adjusting screws
(with hexagon socket)
Tilted 15° in the 360° rotation range.
Rotated 360° to the left and right.
CAUTION
After adjustment, confirm that the projector is fixed securely.
Angle fine-adjusting screw
This screw facilitates fine adjustment of the projection
angle while the projector is half fixed.
After determining the projection angle, make sure to fix
securely the projector with the angle adjusting screws.
15° 15°
After the projector angle is fixed once, if the angle is adjusted
again in the fixed status, the fixed area may be deformed and
adjustment might no longer be possible. Loosen the angle
adjusting screws before adjusting the angle again.
If the angle is not proper, adjust the angle again.
3