Choosing Images Individually
•
Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
1
Choose [Select].
z
z
Following step 2 on = 1 20, choose
[Select] and press the <m> button.
2
Choose an image.
z
z
Press the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button. [
z
z
To cancel selection, press the <m>
button again. [
z
z
Repeat this process to specify other
images.
3
Protect the image.
z
z
Press the <n> button.
A confirmation message is displayed.
z
z
Press the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
Protecting Images
] is displayed.
] is no longer displayed.
121