Specific Shutter Speeds and Aperture
Values (<M> Mode)
Follow these steps before shooting to set your preferred shutter speed
and aperture value to obtain the desired exposure. For details on available
shutter speeds and aperture values, see "Specifications" (= 2 03).
Aperture Value
Shutter Speed
Standard Exposure
Level
Exposure Level Mark
Exposure Level Indicator
•
After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
•
Screen brightness may change depending on your specified
shutter speed or aperture value. However, screen brightness
remains the same when the flash is up and the mode is set to [h].
•
To have the setting you did not configure in step 2 (whether shutter
speed or aperture value) automatically adjusted to obtain standard
exposure, hold the shutter button halfway and press the <b>
button. Note that standard exposure may not be possible with
some settings.
106
1
Enter <D> mode.
z
z
Set the mode dial to <D>.
2
Configure the setting.
z
z
Press the <b> button, choose
adjustment of shutter speed or aperture
value, and turn the <5> dial to specify
a value.
An exposure level mark based on your
X
X
specified value is shown on the exposure
level indicator for comparison to the
standard exposure level.
The exposure level mark is shown
X
X
in orange when the difference from
standard exposure exceeds 2 stops. "–2"
or "+2" is displayed in orange in the lower
right when you press the shutter button
halfway.
Still Images