Editing Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
•
Some images may not be corrected accurately.
•
To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
•
Protected images cannot be overwritten.
138
1
Choose [Red-Eye Correction].
z
z
Press the <n> button, and then
choose [Red-Eye Correction] on the [1]
tab (= 3 8).
2
Choose an image.
z
z
Press the <q><r> buttons or turn the
<5> dial to choose an image.
3
Correct the image.
z
z
Press the <m> button.
X
X
Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
z
z
Enlarge or reduce images as needed.
Follow the steps in = 1 17.
4
Save as a new image and review.
z
z
Press the <o><p><q><r> buttons or
turn the <5> dial to choose [New File],
and then press the <m> button.
The image is now saved as a new file.
X
X
z
z
Follow step 5 on = 1 34.
Still Images