Connecting GPS Devices via Bluetooth
94
On the [53] tab, select [Communication
1
settings].
Select [Bluetooth device connection].
2
Once you have set [Communication func] to
[Enable], you can select [Bluetooth device
connection].
Press <0> when the next screen shown below is
displayed.
Select the GPS device.
3
Nearby Bluetooth® devices in use are listed.
Turn the <5> dial to select the GPS device, and
then press <0>.
Select [OK] and press <0>.
If a Bluetooth® password has been set on the
GPS device, a password input screen is displayed.
Enter the password.
The transmitter now starts to establish a
connection with the GPS device.
It may take a few minutes to establish a
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.