Connecting Gps Devices Via Bluetooth - Canon Wireless File Transmitter WFT-E4 II A Instruction Manual

Connecting GPS Devices via Bluetooth

By attaching the Canon Bluetooth Unit BU-30 to the USB port, you can connect Bluetooth®
GPS devices wirelessly. (Bluetooth® devices other than GPS devices cannot be connected).
When using non-Canon Bluetooth units, confirm normal operation before use.
Turn off the GPS device and camera before attaching the Bluetooth unit to the transmitter.
The transmitter's USB port is not hot-pluggable. Bluetooth units cannot be connected or
disconnected indiscriminately. Follow the instructions in this section when attaching or
detaching Bluetooth units.
When replacing the transmitter battery, always set the camera's power switch to <
opening the transmitter battery compartment cover. If the transmitter battery compartment cover is
opened without setting the camera's power switch to <
connection to the Bluetooth unit.
Attach the Bluetooth unit.
1
Open the port cover and attach the Bluetooth unit.
In [WFT settings], select [USB device
2
connec.]
If you will not use a wireless or wired LAN at the
same time as the Bluetooth unit, set
[Communication mode] to [Disconnect].
Select [Bluetooth].
3
Select [Connect].
4
OFF
>, you will need to reestablish the
OFF
> before
91