Canon Wireless Transmitter WFT-E6A Instruction Manual page 91

Set up the master camera.
6
After configuring the master camera settings
following steps 1–5 on the preceding page, select
[Master].
When the next screen is displayed, the master
camera is ready. Go to step 7 to set up the slave
cameras.
Set up the slave cameras.
7
After configuring the slave camera settings
following steps 1–5 on the preceding page, select
[Slave].
Select [OK] on the next screen displayed, shown
below.
To set the time on multiple slave cameras, follow
these steps on each slave camera. The master
camera screen shown in step 8 indicates the
number of slave cameras.
On the master camera, select [OK].
8
Check the number of slave cameras, and then
select [OK].
The time on slave cameras is now synchronized to
the master camera time.
Select [OK] to return to the [Network settings]
screen.
Synchronizing the Time
91