Canon EOS Rebel T4i 18-135mm IS STM Lens Kit Instruction Manual page 282

wPrinting
e Adjustment of Printing Effects
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram's distribution and adjust the
image's brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the < >. Press the <U> key to freely adjust
h
the shadow level (0-127) or highlight level (128-255).
kBrightener
Effective in backlit conditions that can make the subject's face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [ Brightener] and [Red-eye corr.] effects will not be reflected on
k
the screen.
When you select [Detail set.], you can adjust the [Contrast], [Saturation],
[Color tone], and [Color balance]. To adjust the [Color balance], use the
< > keys. B is for blue, A for amber, M for magenta, and G for green.
S
The image's color balance will be corrected towards the selected color.
If you select [Clear all], all the printing effect settings will be reverted to
their defaults.
282
In step 4 on page 280, select the printing
effect. When the <e> icon is displayed
brightly next to <z>, you can press
the <B> button. You can then adjust
the printing effect. What can be adjusted
or what is displayed will depend on the
selection made in step 4.