k Shooting Movies
Connecting the camera to a TV set is recommended to play back the
movies shot (p.258, 261).
Autoexposure Shooting
When the shooting mode is not set to <a>, autoexposure control will
take effect to suit the scene's current brightness.
Recording movie
Microphone
170
Set the power switch to <k>.
1
The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.
Set the shooting mode.
2
Set the Mode Dial to any shooting
mode except <a>.
Focus the subject.
3
Before shooting a movie, focus with
AF or manual focus (p.153-161, 164).
By default, [Movie Servo AF:
Enable] is set so that the camera will
always focus. To stop Movie Servo
AF, see page 191.
Shoot the movie.
4
Press the <A> button to start
shooting a movie. To stop movie
shooting, press <A> again.
While the movie is being shot, the
"o" mark will be displayed on the
upper right of the screen.