Canon EOS Rebel T4i 18-135mm IS STM Lens Kit Instruction Manual page 281

With Easy printing, you can print another image using the same settings.
Just select the image and press the <
number of copies will always be 1. (You cannot set the number of
copies.) Also, any trimming (p.283) will not be applied.
The [Default] setting for printing effects and other options are the
printer's own default settings as set by the printer's manufacturer. Refer
to the printer's instruction manual to find out what the [Default] settings
are.
Depending on the image's file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If image tilt correction (p.283) is applied, it may take longer to print the
image.
To stop the printing, press <
[OK].
If you execute [Clear all camera settings] (p.210), all the settings will
revert to their defaults.
Set the date and file number
5
imprinting.
Set them if necessary.
Select <
I
Set as desired, then press <0>.
Set the number of copies.
6
Set it if necessary.
Select <
R
Set the number of copies, then press
<0>.
Start printing.
7
Select [Print], then press <0>.
> button. With Easy printing, the
l
> while [Stop] is displayed, then select
0
>, then press <0>.
>, then press <0>.
wPrinting
281