Residual Heat Indicator; Programming The Hob; Switching The Hob On And Off; Set The Hotplate - Bosch PIE975N14E Instruction Manual

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.

Programming the hob

This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.

Switching the hob on and off

The hob is turned on and off using the main switch.
To switch on: press the
%
the hotplate displays light up. The hob is ready for use.
$
To switch off: press the
%
the hotplate displays turn off. The hob is switched off. The
$
residual heat indicator will remain lit until the hotplates have
cooled down sufficiently.
Note: The range turns off automatically when all of the
hotplates are off for over 15 seconds.

Set the hotplate

Select the power level required with the 1 to 9 symbols.
Power level 1 = minimum power
Power level 9 = maximum power
Each power level has an intermediate level. This level is marked
with the symbol in the programming area.
Û

Cooking guidelines table

The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels affect cooking results.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and keeping warm
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
* Uncovered cooking
** Uncovered
8
symbol. The main switch display and
symbol. The main switch display and
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
Selecting the power level
The hob must be switched on.
Press the symbol of the corresponding hotplate.
$
1.
Indicator . will come on.
‹ ‹
Then press the required power level symbol.
2.

To change the power level: select the hotplate and then press
3.
the symbol of the required power level. To select an
intermediate level, press the
power level symbols.
Switch off the hotplate
Select the hotplate and then press the power level symbol 0.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
Power level
1-1.5
1-1.5
1-2
1.5-2.5
3-4
2.5-3.5
2.5-3.5
œ / • light will remain on as long as

symbol that is between the
Û
Cooking time
(minutes)
-
-
-
-
-
5-15 min
20-30 min
/
œ •