Changing The Password; Adjusting The Vga Picture; Adjusting The Component Picture - Dynex DX-LCDTV19 User Manual

Using your LCD TV
Note: The Advanced Rating option appears only in Digital TV mode.
5 Press CH+ or CH– to select US Ratings or Canadian Rating,
then press VOL+ or ENTER. One of the following ratings screens
opens.
6 Press CH+ or CH– to select the rating you want to block, then
press ENTER. The rating you selected and all higher ratings are
blocked.

Changing the password

To change the password:
1 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
2 Press VOL+ or ENTER, then press CH+ or CH– one or more times
to select Password Set.
3 Press VOL+ or ENTER. The Enter Old Password screen opens.
4 Press the number buttons to enter the old password. If you have
not set a password, enter the default password 0000.
5 When prompted, enter the new password twice.
Note: If you change the password then forget it, enter 9443.

Adjusting the VGA picture

To adjust the VGA picture:
1 Make sure that your LCD TV is connected to a computer through
the VGA connections.
2 Press INPUT one or more times to select VGA.
3 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
4 Press VOL+ or ENTER, then press CH+ or CH– to select VGA Set.
5 Press VOL+ or ENTER. The VGA Setting screen opens.
50
50
50
50
6 Press CH+ or CH– to select an option, then press VOL+ or ENTER
to confirm.
7 Press VOL+ or VOL– to adjust the option. You can select:
• H-Position–Moves the screen image left or right.
• V-Position–Moves the screen image up or down.
• Clock–Minimizes any vertical bars or stripes in the screen
image.
• Phase–Minimizes any horizontal distortions and sharpens
the screen image.
• Auto Adjust–Automatically adjusts the VGA settings for the
best screen image.
• Setting–Resets the VGA settings to the factory defaults.

Adjusting the component picture

To adjust the component picture:
1 Make sure that your LCD TV is connected to a computer through
the component connections.
2 Press INPUT one or more times to select Component.
3 Press MENU, then press CH+ or CH– one or more times until the
following menu opens.
11