Asus P8Z77-M PRO User Manual page 76

Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
[Auto]
[Manual]
[X.M.P.]
The [X.M.P.] configuration option appears only when you install memory modules
supporting the eXtreme Memory Profile(X.M.P.) Technology.
eXtreme Memory Profile
This item appears only when you set the Ai Overclocking Tuner item to [X.M.P.] and
allows you to select the X.M.P. mode supported by your memory module.
Configuration options: [Profile #1] [ Profile #2]
BCLK/PEG Frequency [XXX]
Allows you to adjust the CPU and VGA frequency to enhance the system performance. Use
the <+> and <-> keys to adjust the value. You can also key in the desired value using the
numeric keypad. The values range from 80.0MHz to 300.0MHz.
Turbo Ratio [Auto]
Allows you to set the CPU ratio automatically or manually.
[Auto] Sets all Turbo Ratio to Intel
[Manual] Sets the Turbo Ratio for every core-activation condition of a full unlocked
CPU manually.
When the Turbo Ratio is set to [Manual], the following item appears:
Ratio Synchronizing Control [Enabled]
[Enabled] Allows you to set an individual Turbo Ratio for every core-activation condition
[Disabled] Allows you to set one single Turbo Ratio for all core-activation conditions.
1-Core Ratio Limit [Auto]
Allows you to set the 1-Core Ratio Limit
[Auto]
[Manual]
2-Core Ratio Limit [Auto]
Allows you to set the 2-Core Ratio Limit
[Auto]
[Manual]
3-8
Loads the optimal settings for the system.
Allows you to individually set overclocking parameters.
If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by your
memory modules for optimizing the system performance.
®
Select to apply the CPU default Turbo Ratio setting
Select to to manually assign a 1-Core Ration Limit value that is higher
than or equal to the 2-Core Ratio Limit.
Select to apply the CPU default Turbo Ratio setting
Select to to manually assign a 2-Core Ratio Limit value that is higher than
or equal to the 3-Core Ratio Limit. 1-Core Limit must not be set to [Auto]
CPU default settings automatically.
Chapter 3: BIOS setup