Select Disable Acceleration to disable
3.
this function, and select Change Mode to
switch acceleration mode to Enhanced/
Maximized.
•
•
•
Intel
Rapid Start Technology
®
Intel
Rapid Start Technology allows your system to quickly wake up from sleep mode.
®
•
•
Creating a partition
•
•
Go to Start, right-click Computer > Manage > Disk Management.
1.
2.
Select the SSD that you want to partition.
4-30
To enable Intel® Smart Response Technology, you need at least one SSD ( 20GB)
To enable Intel® Smart Response Technology, you need at least one SSD ( 20GB)
and a HDD, and only one SSD can be assigned for caching.
If you want to restore the OS, go to BIOS Option ROM > Acceleration Options and
If you want to restore the OS, go to BIOS Option ROM > Acceleration Options and
remove the Disks/Volume Acceleration to disable Intel® Smart Response Technology.
Refer to Chapter 4, section Installing Serial ATA hard disk for the entry of BIOS Option
ROM.
The maximum caching size on the SSD is 64GB. If it exceeds, the storage capacity
The maximum caching size on the SSD is 64GB. If it exceeds, the storage capacity
left out for caching can still be identified by the system for normal storage.
Rapid Start Technology, go to Advanced Mode > Advanced >
Before applying Intel
®
PCH Configuration in BIOS item, and enable Intel
Ensure to follow the procedure Creating a partition precisely to enable the Intel
Rapid Start function. Error message appears if you install the Intel
before creating a partition.
Ensure to back up your data before using the Microsoft partition tool. Incorrect
partitioning process will result to data loss.
Adjusting the DRAM to a high frequency will result to an unstable system
performance.
> =
Rapid Start Technology.
®
Rapid Start Utility
®
Chapter 4: Software support