Fan Speed Monitor; Fan Speed Control - Asus Maximus IV GENE-Z/GEN3 User Manual

Fan Speed Monitor

CPU FAN; Chassis FAN1/2/3 Speed; CPU FAN OPT Speed [xxxxRPM] or
[Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan, chassis fan, and optional fan speed in rotations per minute (RPM). If any
of the fans is not connected to the motherboard, the field shows [N/A]. These
items are not user-configurable.

Fan Speed Control

CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU fan controller.
[Disabled]
[Enabled]
The following three items appear when you enable the CPU Fan Control
feature.
CPU Fan Speed Low Limit [600 RPM]
Allows you to set the low speed limit of the CPU fan and the system sends
warning message when the fan speed drops below the set value.
Configuration options: [Ignored] [200 RPM] [300 RPM] [400 RPM] [500 RPM]
[600 RPM]
CPU Fan Profile [Standard]
Allows you to set the appropriate performance level of the CPU fan.
[Standard]
[Silent]
[Turbo]
[Manual]
The following four items appear only when you set CPU Fan Profile to
[Manual].
CPU Upper Temperature [70]
Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The
values range from 20ºC to 75ºC.
ROG MAXIMUS IV GENE-Z/GEN3
Disables the CPU Q-fan controller.
Enables the CPU Q-fan controller.
Sets to [Standard] to make the chassis fan automatically adjust
depending on the CPU temperature.
Sets to [Silent] to minimize the fan speed for quiet CPU fan
operation.
Set to [Turbo] to achieve maximum CPU fan speed.
Sets to [Manual] to display more items for you to manually
adjust the CPU upper/lower temperature, and CPU fan upper/
lower duty cycle.
3-31