Firmware Restoration - Asus RT-N56U User Manual

Extreme performance in style dual-band wireless-n gigabit router
Hide thumbs Also See for RT-N56U:
Table of Contents


Firmware Restoration

Firmware Restoration is used on an ASUS Wireless Router that
failed during its firmware upgrading process. It uploads the
firmware that you specify. The process takes about three to four
IMPORTANT: Launch the rescue mode before using the
Firmware Restoration utility.
To launch the rescue mode and use the Firmware
Restoration utility:
1. Unplug the wireless router from the power source.
2. Hold the Reset button at the rear panel and simultaneously
re-plug the wireless router into the power source. Release the
Reset button when the Power LED at the front panel flashes
slowly, which indicates that the wireless router is in the rescue
3. Use the following to set up your TCP/IP settings:
IP address: 192.168.1.x
Subnet mask:
4. From your computer's desktop, click
Start > All Programs > ASUS Utility RT-N56U Wireless
Router > Firmware Restoration.

Hide quick links:


Table of Contents

Table of Contents