Connecting A Computer; Connecting Headphones; Connecting An External Sound System - Dynex DX-L40-10A User Manual

DX-L40-10A_09-0537_MAN_ENG_V1.book Page 12 Tuesday, July 28, 2009 10:07 AM
12
DX-L40-10A

Connecting a computer

Tip: Some computers have an HDMI connector, which can be
used for a better picture.
To connect a computer:
1 Make sure that your TV's power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable to the VGA jack on the
computer, then connect the other end of the
cable to the VGA jack on the back of your TV.
Note: The VGA cable should be a 15-pin D-Sub (analog RGB)
cable.
Audio cable (stereo mini plugs)
HDMI3 HDMI2
AUDIO OUT
L R
VIDEO L
L
Y P
R
COMP1
Back of TV
Computer
3 Connect an audio cable to the AUDIO OUT jack
on the computer, then connect the other end of
the cable to the VGA AUDIO IN jack on the back
of your TV.
Note: The audio cable should have a stereo mini plug.
To play video from a computer:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE menu opens.
2 Press
or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the display
properties, if necessary.
AV2
R
B P R L R
COMP2
VGA cable

Connecting headphones

To connect headphones:
• Connect your headphones to the HEADPHONE
jack on the side of your TV.
Side of TV
Note: Loud noise can damage your hearing. When using
headphones, use the lowest volume setting that still lets
you hear the sound.

Connecting an external sound system

To connect an external audio device:
1 Make sure that your TV's power cord is
unplugged and the component video device is
turned off.
2 Connect an analog audio (L and R) cable to the
Audio Out (L/R) jacks on the back of your TV.
- OR -
Connect a digital optical (Toslink) cable to the
DIGITAL OUTPUT jack on the side of your TV.
Back of TV
HDMI3 HDMI2
AUDIO OUT
AV2
HDMI1
L R
VIDEO
VIDEO L
R
L
L
Y P
P L R
B R
R
COMP2
COMP1
Analog audio cables
Stereo
3 Connect the other end of the analog audio (L
and R) cable to the AUDIO IN jacks on the
analog stereo receiver.
- OR -
Connect the other end of the digital optical
(Toslink) cable to the DIGITAL INPUT jack on
the digital amplifier.
Making connections
Headphones
Side of TV
R
O S-VIDE HEADPHONE
Digital optical (Toslink)
audio cable
Digital amplifier