Table of Contents
Advertisement
Serial Port Configuration
Serial Port [Enabled]
This item allows user to enable/disable Serial Port (COM).
Change Settings [IO=3F8h; IRQ=4]
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
Back
Advanced\ Onboard Devices Configuration\
Serial Port Configuration
Serial Port
Change Settings
4.5.8
APM
UEFI BIOS Utility - Advanced Mode
Main
Back
Advanced\
Restore AC Power Loss
Power On By Keyboard
Power On By Mouse
Power On By PCIE
Power On By Ring
Power On By RTC
ErP Ready
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By Keyboard [Disabled]
[Disabled]
Configuration options to Enable keyboard to generate a wake event:
[Space Bar] [Ctrl-Esc] [Power Key]
4-42
[Disabled]
Disables configuration.
Change Settings appear under [Enabled]. Select an optimal
[Enabled]
setting for Super IO device.
[IO=2E8h; IRQ=3]
Ai Tweaker
Advanced
APM >
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the keyboard device from generating a wake event.
Serial Port Configuration >
Enabled
IO=3F8h; IRQ=4
Monitor
Power Off
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Select an optimal setting for Super
IO device.
Exit
Boot
Tool
Specify what state to go to when
power is re-applied after a power
failure (G3 state).
Chapter 4: BIOS setup
Advertisement
Table of Contents
