Dell Inspiron 9100 Service Manual page 54

Display Assembly and Display Latch: Dell Inspiron XPS and Inspiron 9100 Service Manual
1 M2.5 x 6-mm screws (6)
2 rubber display bumpers (6)
3 M2.5 x 6-mm shoulder screws (2) 7 display base
4 screw covers (2)
Display Bezel
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main
battery before you begin working inside the computer.
1. Follow the instructions in
2. Remove the display.
3. Remove the six rubber display bumpers and two screw covers.
4. Remove the six M2.5 x 6-mm screws and two M2.5 x 6-mm shoulder screws and
remove the display bezel.
file:///F|/Service%20Manuals/Dell/Inspiron/9100/display.htm (6 of 11) [2/28/2004 7:45:55 AM]
5 display bezel
6 display panel
8 M2.5 x 3-mm screws (8)
"Preparing to Work Inside the Computer."